T-bolt For Embedded Channel System

The diamond-shaped design of the bolt head of t-bolt for embedded channel system can effectively prevent the bolt from over-threading. There is a notch on the end of the screw to facilitate correct installation and positioning. Advanced casting technology, sharp and flexible products.

 

T-bolt for embedded channel system has 8.8 mechanical properties, excellent tensile, shear, fatigue and fire resistance. The surface adopts hot-dip galvanizing process, the thickness of the zinc layer is above 55um to ensure smooth tightening of nuts and bolts, and special multi-alloy co-permeation coating technology is adopted to effectively avoid a series of contradictions when the coating is thickened.

 

The t-bolt for embedded channel system has a closed toothed T-bolt head and a toothed embedded groove to ensure that the longitudinal load transmission of the channel is realized through the locking force of the tooth, and the risk of slipping is minimized.

View as  
 
  • 64/44 Tooth T-bolt 1. Features and advantages 1. The diamond-shaped design of the bolt head can effectively prevent the bolt from being over-threaded 2. There is a notch mark on the end of the screw to facilitate correct installation and positioning 3. Intermediate frequency heating, cold heading combined with red beater, stable performance and beautiful appearance 4.8.8 level mechanical performance, dovetail multi-tooth design, excellent tensile, shear, fatigue, and fire resistance 5. The surface adopts hot-dip galvanizing process, the thickness of the zinc layer is 55um, to ensure the smooth screwing of the nut and bolt

  • 53/34 Dovetail T-bolt With Teeth 1. Features and advantages 2. The diamond-shaped design of the bolt head can effectively prevent the bolt from being over-threaded 3. There is a notch mark on the end of the screw to facilitate correct installation and positioning 4. Intermediate frequency heating, cold heading combined with red beater, stable performance and beautiful appearance 5.8.8 level mechanical performance, dovetail and multi-tooth design, excellent tensile, shear, fatigue, and fire resistance 6. The surface adopts hot-dip galvanizing process, the thickness of the zinc layer is 55um, to ensure the smooth screwing of the nut and bolt

  • The 38/23 Tooth T-bolt design bolt head can effectively prevent the bolt from being over-threaded, There is a notch mark on the end of the screw to facilitate correct installation and positioning. The 38/23 Tooth T-bolt surface adopts hot-dip galvanizing process, the thickness of the zinc layer is 55um, to ensure the smooth screwing of the nut and bolt.

  • The 30/20 Tooth T-bolt surface adopts special multi-alloy co-permeation coating technology, which effectively avoids the contradiction between coating and anti-off when the coating thickness is 80um, and meets the 150-hour copper accelerated test, the neutral 1200-hour salt spray test and higher requirements.

  • The hammer head toothed T-bolt and the toothed pre-buried slot are occluded to ensure that the load transmission in the longitudinal direction of the channel is realized through the locking force of the teeth, and the risk of slippage is minimized.

 1 
Wofu Hardware is one of the professional T-bolt For Embedded Channel System manufacturers and T-bolt For Embedded Channel System suppliers in China. We not only provide customized services, but also provide free samples. You place an order now, we have it in stock. Welcome to wholesale and buy T-bolt For Embedded Channel System made in China from our factory. Our company has professional management personnel and technical team, set production, sales, service in one, with specialized technology, diversified products to provide customers with fastener system services and solutions services.